Proportional Integral Electric Control Valve Smart Control Valve

• Specification: DN15-DN65
• Trademark: ILSY-IVA
• Origin: China
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HSTJ-YHA
• HS Code: 84819010
• Production Capacity: 10000pieces/Year
• Package Size: 50.00cm * 40.00cm * 30.00cm
• Package Gross Weight: 5.000kg

Product Description

Performance parameters:

Valve body material: forged 59-1 brass 304 stainless steel valve stem EPDM seal

Connection diameter: DN15~DN65 two-way/three-way (shunt/confluence)

Connection method: G-tooth internal thread (NPT can be customized)

Medium range: hot and cold water or 30% ethylene glycol solution 0°C~95ºC

Flow characteristics: 0~30% linear 30~100% and other percentages

Valve leakage rate: less than 0~0.05 of KVS value%

Valve body pressure: 2.0Mpa

Drive material: die-cast ADC12 aluminum bracket, steel gear, PC shell

Working voltage: AC24V50/60Hz motor power consumption: 6.5VA (control in place, motor power-off protection

function)

Display function: valve position display, manual/automatic conversion, no signal, electric opening/closing

Control method: intelligent type (0~10V/4~20mA)

Output torque: 1500N (with power-off and manual turn-on function)

Installation method: in-line quick connection installation


Installation method and precautions:

1.Reserve enough space during installation for maintenance.

2.After the control valve is installed, the wiring should comply with the national electrical construction specifications,

and the wiring should be in case of power failure.

3.The drive cannot be covered by thermal insulation materials to prevent the drive from dissipating heat unfavorably.

4.Priority should be given to vertical installation. It can be installed tilted or horizontally on special occasions, but

when the volume, weight, and vibration are too large, it needs to be supported and fixed.

5.Manual valves are recommended to be installed at both ends of the regulating valve for easy maintenance. The

screw and gear should be maintained with butter for three to four months during use.

6.When the installation location of the regulating valve is not indicated on the design drawing, the regulating valve is

generally installed on the loop water pipe.




 

overview

   The YHA series intelligent electric actuator and the regulating valve body constitute an electric regulating valve, which is an executive regulating mechanism in an industrial process measurement and control system.It can be widely used in petroleum, chemical industry, water treatment, shipbuilding, papermaking, power stations, heating, building automatic control, light industry and other industries.

   The valve body is formed by one-time forging of high-quality brass, the material density is high, and the strength is more than 5 times higher than that of ordinary cast valve body. The valve body has no bottom cover design, and the stem is protected by a 4-layer seal with lubrication, which has a longer service life than ordinary valves.



 

Product features

1.The actuator has a digital display valve position function, and the opening of the door can be adjusted manually by pressing the button.;

2.Flexible combination of valve body and actuator, which can adapt to the needs of different pressure differentials;

3.The actuator adopts synchronous motor and has a limited power-off protection function.Can produce a stable torque at a standstill so that the valve can be stationary in any position;

4.Forward and reverse control: forward and reverse can be set as needed to match different valve bodies;

5.Smart;








Frequently asked questions


1.Where is the main market for your products?
Answer: Our company has about ten years of experience in selling valves in China, but it is still just starting out in terms of exports. We hope to conduct business with companies from all over the world in the future.

2.Can samples be provided?
Answer: We can provide samples, but the freight needs to be paid by the customer.

3.How long is the delivery time?
Answer: It currently takes about 15 days, but it does not rule out that there may be special circumstances in the middle to extend the delivery time, we will communicate with you in time; if you need special customization, the delivery time will be extended, you can consult customer service for details.

4.What are the payment methods?            
Answer: We currently support two payment methods, L/C and T/T.

5.How do you guarantee the quality of your products?
Answer: Our products are strictly tested before leaving the factory. Unqualified products will not be sold. Please rest assured.

6.How long is the warranty period?
Answer: Our warranty period is one year. If it is not man-made damage during the period, we will provide free maintenance; if it is product damage caused by improper customer operation and installation, we only provide paid warranty service.

7.Where is the shipping port usually?
Answer: Our shipping port is generally in the port of Shanghai, and we may also ship from the port of Ningbo.


Welcome to consult for more questions.