Media: | Water |
---|---|
Material: | Brass |
Connection Form: | Internal Thread Connection |
Samples: |
Blue drive + brass nickel-plated valve body as a s
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product features:
· Good waterproof and dustproof function (IP65). · The temperature of the medium is not easy to transfer to the actuator. · The actuator is easy to disassemble and install. · The actuator can be installed after the equipment and pipeline are installed, which is more conducive to improving the installation efficiency. · Due to the eccentric structure of the actuator, the valve can be installed close to the wall. ·Remove the ball valve of the drive and switch with ordinary tools. |
· The actuator can be adapted to all ball valves of DN15~DN40. · The actuator can be assembled in 2 directions, making it easier to connect and maintain. · The closing pressure difference is large and the closing is strict. · Direct water flow, no slag blocking. · The valve is opened flexibly, which can effectively prevent water hammer. · After the valve is in place, the motor does not withstand any force, and the motor has a longer life. |
Technical parameters | Material |
· Nominal pressure: 2.0MPa. · Closing pressure difference: 1.0MPa. · Medium: hot and cold water, an aqueous solution of ethylene glycol within 60%. · Medium temperature: 1ºC~95°C (liquid). · Control signal: three-state floating point (24VAC) or on/off. · Power supply: AC220V, 50/60Hz or AC24V, 50/60Hz. · Power consumption: 6W. · Running time: 12 seconds~18 seconds. · Stroke: The angle stroke is 90 degrees. · Torque: 4Nm. · Protection level: IP65. · Structure: two-way, three-way out, three-way side out. |
· Valve body: forged brass. Optional: forged brass, nickel plating, copper casting, stainless steel. · Valve ball: stainless steel. Optional: brass chrome plated. · Valve stem: brass optional: brass nickel plated, stainless steel. · Valve seat: PTFE · Seal: EPDM · Motor: reversible synchronous hysteresis motor |
· Threaded connection: North American general pipe thread (internal thread) NPT. · British standard flat thread (external thread) BSPP. · British standard flat thread (internal thread) BSPP. · British standard tapered pipe thread (internal thread) BSPT. ·Card sleeve connection (external thread). |
Suppliers with verified business licenses